In the past one or two years, due to incidents of exceptional lead in faucets, we have become increasingly concerned about the health of household water use In fact, in addition to the quality of the materials used in the selection of faucets, their installation and daily use also have a significant impact on our water use health However, many people have not notified:
At least three different spatial differentiation devices for faucets
Most families, regulations of space and usage needs, only buy many faucets of the same type to install in their homes In fact, it is unscientific A family can have three types of faucets: single cooling, heating and cooling, and bubbling
Faucets can be divided into several types based on their usage, including bases, kitchen bases, bathtub, washing machine, and mop pool faucets In terms of function and structure, they can also be divided into single cooled ordinal faucets, introduction faucets, cold and warm faucets, water saving faucets with a bubble maker, etc. Basin, kitchen basin, and batch faucets generally use cold and warm faucets and faucets with a bubble maker, while washing machine and mop pool faucets can use single coil OLED faucets, It is generally not recommended to buy faucets with bubbles on balconies and other local areas This is not only increasing the speed of flushing and mopping, but also enhancing the flushing ability, which actually has a water saving effect
Hot and cold faucets cannot be directly connected to one water pipe
Many people think that it is not a problem to buy a cold and hot faucet at home but only connect one inlet host, but in fact, the ceramic valve core is a three port interconnected structure, and the water from two inlet hosts needs to be mixed before flowing out from the faucet outlet Only one water pipe can make the cold and hot faucet unusable Many people do not know why they think that the quality of the cold and hot control is poor, which may even lead to flooding
The cold and hot faucet uses a ceramic valve core with different opening perspectives to control the mixing ratio of cold and hot water, and then complete the function of water temperature regulation Assuming that you only have one cold water pipe in your home but have purchased a cold and hot faucet, it is recommended that you connect two inlet hosts together, then connect one to the corner valve, and use a raw plug to block the other
The faucet is connected to the water pipe with an angle valve
Many people know to install faucets, but they don# 039; T know to install corner valves The outlet and inlet of the angle valve form a 90 degree right angle, which can connect the inner wall water pipe with the faucet host and control the water flow switch effect
Any cold and hot faucets (with a cold and hot water inlet host) can only be connected to the water pipe through an angle valve, while faucets like washing machine faucets and mop pool dragon head quick opening faucets can be directly connected to the water pipe, so there is no need for an angle valve Generally speaking, each hot and cold faucet requires two corner valves to be matched with each other If the faucet shows leakage, simply close the corner valve, which will not affect the water use in other local areas of the home
The appearance and interval of the faucet should be cleaned regularly
How long has it been since your faucet was cleaned at home? Altough we use faucets almost every day, few people pay attention to the cleanliness of the exterior or even the interval of the faucet
After installing the faucet, it is recommended to clean the stairs and fingerprints on its surface every other month, rinse the surface with clean water, and dry it with a soft cloth; The brightness maintenance of the appearance can be cleaned with car wax once a month The cleanliness of the exterior is for aesthetics, while the cleanliness of the interior is the factor that affects its service life
In addition, if the faucet shows a decrease in water volume or a split in water output, it indicates that the faucet# 039; S bubble is blocked At this time, the bubble should be removed, soaped in wine, cleaned with a small brush or other tools, and then reinstalled
The faucet cannot be turned on or used immediately
Most people are accustomed to turning on the faucet in the morning and using it directly, but generally speaking, before using the faucet on the next day, the water accumulated in the faucet excess should be drained first and then used
Regarding faucets, people tend to turn paper when they hear about leading In fact, no matter how good a faucet is, it is difficult to avoid more or less lead element precision polling However, in general, due to the effect of the lead protective film inside the faucet, its content is significantly reduced to the standard level
However, prolonged retention of water in the faucet can cause the lead protective film to fall off, and lead elements will be precise when dissolved in water Especially traditional faucets and pipes are more prone to rust and polar water quality, so when using them in the morning, it is necessary to first drain the yellow water stored in the pipes In terms of product selection, stainless steel faucets are relatively healthy, but the price will be higher
The leader exchanges missing cards every five years
After buying a house and renovating it, many things at home, except for household appliances and other large items, will last for ten to ten years That# 039; Why we attach so much importance to the quality of home products However, for products like faucets, even if they have been used for many years without any damage, you should also replace them, because faucets will have varying degrees of conflict over time
Regarding faucet products with good brand reputation, they can be replaced every five years For faucet products that are relatably niche or even have no brand guarantee, it is recommended to replace them every year As for non drinking faucets such as laundry, it is not important to use them for a long time, and they should also be replaced every 6-7 years
Article source: Kaiping faucet http://www.clasito.net
04-13
What is the reason for installing a bubble on a flat faucet
I don# 039; T know if we have ever thought about why there are so many bubbles in the water flowing out of the faucet? Actually, this is mainly because the faucet is required with a bubble, which can
04-13
What are the surface treatment processes for faucets
In recent years, with the advancement of technology, there has been a wide variety of faucet products In order to match different styles of home design, faucets have become more colorful, and there ar
04-13
How to maintain and maintain a flat bathroom faucet
After choosing a preferred bathroom faucet, how to use and maintain it correctly is a headache and headache for many users In fact, as long as the installation, use, and maintenance are correct and ap
04-13
How to determine the height and orientation of the Kaiping bathroom faucet
Strict requirements should be placed on the height of the faucet, and attention should be paid to issues such as water leakage during installation Therefore, when installing a bathroom faucet, the con
Copyright © 2023 Kaiping Kashitu Sanitary Ware Co., Ltd. All rights reserved