Installation method of electric water heater faucet

Before installing a fast electric water heater with a faucet, it is necessary to first check the installation environment and select the detailed size of the faucet based on the specific situation. It is important to distinguish between upper and lower water outlets. The lower water outlet should be hung on the wall because drilling is required, so it is recommended not to purchase it. The upper water outlet can be directly placed underground in the sink, eliminating the need to install a fixed faucet fast electric water heater, We just need to connect it to the water supply system. To prepare materials, you need to use metal hoses, tees, angle valves and wrenches, raw material belts, etc. Generally, they are available. If you don&t have them, you can buy them for a few tens of yuan. Connect the quick electric water heater with the faucet according to the device diagram. If you have some hands-on ability, be sure to wrap the raw material tape enough to prevent water leakage.

Precautions for the installation of electric water heater faucets

After installing the faucet fast electric water heater, open the angle valve and turn the faucet to the hot water side. Wait until the hot water side releases water normally, indicating that the water tank of the faucet fast electric water heater is full of water. At this time, power on to boil water, and then use the faucet to discharge the hot water. Be sure to wait for the hot water from the faucet to flow out normally before turning on electricity to boil water. Also, pay attention to electricity prevention and investigate if there is any water leakage.

The article originates from: faucet manufacturer http://www.clasito.net/